ads' corner

Monitor ChromeCast status in openHAB

I really like to monitor things, to catch issues early on. In our home we have a couple ChromeCasts, both Audio and Video. They are all connected to the openHAB system, Once in a while they stop working, and need to be restarted (unplugged and plugged in again). Unfortunately you usually only find that out when you want to stream something, and wonder why either the ChromeCast does not show up in the device list, or does show up but does not accept the media.


openHAB and HP printer

Recent openHAB versions come with a new HP Printer Binding, which is a big improvement over the more general IPP Binding for printers.


raspi-config automated

While I installed the Raspberry Pi with the Raspbee board on it, I had to modify the settings for the serial device. That’s done using the raspi-config tool on Raspbian.

However since I’m into automation, I don’t want to start raspi-config manually, but had to figure out how to do that in an automated way.


New OpenWeatherMap channels missing after openHAB upgrade from 2.4 to 2.5

A while ago I upgraded openHAB from version 2.4 to 2.5. That comes with the usual share of problems, but eventually I got it working.


Install a Raspbee II on a Raspberry Pi

A while ago I got a recommendation to look into a Raspbee (from dresden elektronik) as Zigbee gateway. That looked like fun, therefore I ordered one of the devices. The first step is the installation of the Pi itself and then the software for the Raspbee.


Raspberry Pi watchdog for openHAB

The openHAB display in the kitchen is still the problem child. Occasionally it just stops, other times it does not refresh the HABpanel, even though it has a connection to the openHAB server. Then there is the problem with the network card in the Pi. And - ok, that’s a server-side problem - occasionally the weather stops updating. All in all that’s a lot of trouble for a display which is just supposed to run standalone.

In the latest iteration I looked into activating the integrated hardware watchdog in the Raspberry Pi. Checking the temperature it never goes above ~55°C celcius, even though the display is in an almost closed frame and can’t exchange much heat with the environment. But nevertheless occasionally the Pi just halts, and stops operating.


Ansible, delegate_to and set_fact

Another Ansible upgrade, another Playbook failing.

I have a number Playbooks which run on virtual machines. Some tasks are “outsourced” to the physical machine where the VM is running on, using delegate_to. One of the tasks (which I haven’t used in a while, because I rarely touch this machine) stopped working, and instead throws a variable undefined error. But from the beginning, here is the VM Playbook:


Local cachíng of Ansible Facts

Every time Ansible runs a Playbook, the first step (by default) is gathering facts about the target system:


Restic upgrade on Debian Buster

A while ago I switched backups from Duplicity to Restic. About time: I was using Duplicity for many years (I think I started using it around 2010, long before Restic became available) and it served me well. But recently I ran into more and more issues, especially with archives getting larger and larger. There is an 11 years old open bug in the Duplicity bugtracker, which describes a showstopper for backing up larger archives. And it doesn’t look like this will be solved anytime soon. Therefore it was time for something new.

Since I’m rolling out my backups with Ansible, it was relatively easy to create a set of scripts for Restic which use almost the same infrastructure as the old Duplicity backups. That works as expected on all our laptops. But the Raspberry Pi, which does the fileserver backups, seem to had a problem. Backups took way longer than before, jumped from 30-60 minutes (depending on the amount of changes) to constantly around 10 hours.


Ansible: Use errors="ignore" instead of skip

Another Ansible upgrade deprecation warning, which appears in Ansible 2.8: