Recent openHAB versions come with a new HP Printer Binding, which is a big improvement over the more general IPP Binding for printers.
Recent openHAB versions come with a new HP Printer Binding, which is a big improvement over the more general IPP Binding for printers.
A while ago I upgraded openHAB from version 2.4 to 2.5. That comes with the usual share of problems, but eventually I got it working.
The openHAB display in the kitchen is still the problem child. Occasionally it just stops, other times it does not refresh the HABpanel, even though it has a connection to the openHAB server. Then there is the problem with the network card in the Pi. And - ok, that’s a server-side problem - occasionally the weather stops updating. All in all that’s a lot of trouble for a display which is just supposed to run standalone.
In the latest iteration I looked into activating the integrated hardware watchdog in the Raspberry Pi. Checking the temperature it never goes above ~55°C celcius, even though the display is in an almost closed frame and can’t exchange much heat with the environment. But nevertheless occasionally the Pi just halts, and stops operating.
As mentioned in my previous openHAB blog post: it seems to be too much to ask to have a reliable and working display in the kitchen.
Another problem I found is that the weather data occasionally does not update. Everything seems to work, no errors in the log, just no updated data. Of course this results in outdated weather info in the kitchen, and the threat that “someone” will buy a regular weather station and render my 7" Raspberry display useless.
Don’t you love it when things suddenly stop working?
In my openHAB installation I have a check which verifies that the weather data is up to date. Otherwise it restarts the openhab2 service. And this check stopped working … Leaving the kitchen display not updated for a longer time. The same display where I expect the entire installation to “just work”, and don’t create so many different problems. Seems to be a hard problem to have an openHAB installation without any trouble …
openHAB is a stream of pure joy when it comes to debugging. Especially when all I want is a small display in the kitchen, working autonomous and without the need to restart it all the time or login to fix issues.
Previously I blogged about how the washing machine and the dryer are integrated into the openHAB home automation system.
For a while I had a standard Dummy widget in HABpanel, but that didn’t look very nice, was very standard, and the different icons for different states don’t really work. When I started integrating another Raspberry Pi with a touch screen (blog post to come), I refreshed the HABpanel, added another dashboard, and along the way I wrote a new “Template” widget for the washing machine and the dryer.
After setting up OpenWeatherMap in openHAB, I had another project on my list: send a forecast for the next day.
Next item on my home automation todo list: weather, and forecast. No good system without that data!
After exploring the options which openHAB supports, I settled for OpenWeatherMap. Note: you need an account with OWM, the basic functionality is free, the paid options give you more and better forecast.
You might know that problem: the brand new SSD in your system is super fast, but after a good time using it, the card is dead. Unlike spinning disks, which usually fail over time, and show I/O errors by blocks, SSD cards are prone to a problem called Wear leveling. Blocks which are written more often will “wear out”, and become unresponsible. More writes increase this risk. And a typical openHAB system does a number of writes all the time: every time an external status changes, it’s written to the event log. By default the syslog is written to disk as well, and then there is a myriad of systemd services, writing status information into files.