ads' corner

openHAB: Configuration model '....rules' has errors, therefore ignoring it: no viable alternative at input '...'

The openHAB rule system is not very helpful by pointing out when it’s missing something, or when there is an error to actually point to the problem.


Add a Google Calendar to openHAB

openHAB can integrate Google Calendars. The functionality is kind of limited, it can only see the current and the next calendar event, but in my case that is enough. More about the use case in another blog post.


openHAB: faster loading of rules files

openHAB rules files are lazy loaded. When a rule is used the first time, the entire rule file is loaded and compiled, which apparently is single-threaded and takes a couple seconds. Even on a reasonable powerful Rasperry Pi 4. This happens both after restarting openHAB and after changing the rules file. It also means that whatever the rule in question is supposed to do has to wait a couple seconds when requested for the first time. Imagine you have a light switch, enter a room, press the switch, and it takes 5-10 seconds until the light comes on.

To work around this problem, I add a piece of code in all rules files which triggers an immediate action right after loading the file. This way the rules file is already pre-loaded (which again takes a couple seconds, but likely at a time when the rule is not needed right now).


Improve openHAB Rules response time

By default, openHAB only starts 5 threads to deal with execution of Rules. That’s not a lot, and if all threads are busy, rules have to wait until a slot is free. This results in slow Rule response time.

This can be improved.


openHAB: Turn display on and off for a Video ChromeCast

After figuring out if a ChromeCast is currently used, it was time to fix a long-standing problem. At home we don’t have TVs, just “dumb” displays, and stream content using ChromeCasts. However a video ChromeCast never really turns off, but keeps the display running, using a Backdrop app. This app keeps showing pictures on the display when the ChromeCast is not used otherwise, effectively preventing any powersafe mode.

That’s both annoying (who wants to have pictures shown in the living room or working room all night), and consumes energy. It’s also intentional by Google. So far we had to turn the display on and off manually, which is inconvenient.


openHAB: detect if a ChromeCast is currently used or idle

We have a couple of Audio and Video ChromeCasts in use. For an upcoming project I need to figure out if any of them is currently used. That is different for the Audio and the Video devices: the Audio just goes idle=ON, the Video devices however load the Backdrop app and show pictures when idling. Google for whatever reason does not want the attached monitor to go in powersafe mode. So much for saving energy …


Deutscher Wetterdienst notifications in openHAB and Telegram

The “Deutscher Wetterdienst” DWD (German Weather Service) provices a service which sends out alarms for upcoming events, like heavy rain, storm, blizzard, strong winds ect. This service is only available for Germany. And it has a binding for openHAB. Time to integrate this, activate a number of regions I’m interested in, and send notifications to our mobile phones.


Monitor additional details in Telegraf with the "Exec" input filter

After installing Telegraf and hooking up everything into InfluxDB, I was missing the status of my backups. Every system here creates encrypted backups every night, and stores them on a central NAS, and off-site. But I want to know statistics about the backups, and see if something is not working.

I’m using Restic for the backups (will blog about this another time). However Telegraf does not support Restic directly, I need a few workarounds. This blog post however is not directly about monitoring the backups, but about how to write your own plugin for Telegraf.


Install Telegraf using Ansible

I have an InfluxDB up and running in my network, and decided to monitor all (well, all possible - the QNAP seems to be a problem) devices. That’s quite easy to do by installing Telegraf as a server agent, and add some configuration. Everything is deployed using Ansible, so I can re-use the same Playbook for many devices.

Let’s assume I have a laptop which I want to monitor. The hostname is sunlight (it’s not, I’m just using this as an example).


openHAB and Telegram Bot

openHAB 2 comes with a Telegram binding which allows to run a Telegram Bot. This bot can both send messages to users and groups, and can receive commands and respond to them. That’s useful: your home automation system can send all kind of details to your mobile phone.