ads' corner

Monitor ChromeCast status in openHAB

I really like to monitor things, to catch issues early on. In our home we have a couple ChromeCasts, both Audio and Video. They are all connected to the openHAB system, Once in a while they stop working, and need to be restarted (unplugged and plugged in again). Unfortunately you usually only find that out when you want to stream something, and wonder why either the ChromeCast does not show up in the device list, or does show up but does not accept the media.


openHAB and HP printer

Recent openHAB versions come with a new HP Printer Binding, which is a big improvement over the more general IPP Binding for printers.


raspi-config automated

While I installed the Raspberry Pi with the Raspbee board on it, I had to modify the settings for the serial device. That’s done using the raspi-config tool on Raspbian.

However since I’m into automation, I don’t want to start raspi-config manually, but had to figure out how to do that in an automated way.


Local cachíng of Ansible Facts

Every time Ansible runs a Playbook, the first step (by default) is gathering facts about the target system:


Disable screensaver for Raspberry Pi

The 7" Raspberry display in the kitchen is nice, but unfortunately by default the installation comes with a screensaver enabled. After a while, the display goes dark. No one wants to stare at a blank display, and touch the screen in order to see crucial information.


Remove Trashcan Icon from Raspberry Pi Desktop

Our home automation got a nice 7" Raspberry display in the kitchen, showing the most relevant information (like temperature, weather, washing machine, dryer ect) on a dedicated screen. Quite handy, especially the temperature, and the one-click stop to the weather forecast.

While installing the Pi and setting everything up, I stumbled over the Icons which LXDE by default shows on the desktop. Not necessary, I want them removed. All I want on the desktop is the browser icon which directly goes to the HABpanel.

The reason is simple: if the Pi starts up, but the browser for unknown reasons doesn’t come up, I don’t want anyone to be confused by additional icons on the desktop. After all, usually the LXDE desktop is not seen by default.


_ansible_item_label changes in Ansible 2.8

The Ansible 2.8 upgrade brought a few failing Playbooks. I ran into the following error:


Raspberry Pi: take a screenshot from a display with no keyboard and mouse

The Raspberry Pi in the kitchen runs relatively stable, but recently the browser (which is showing the openHAB HABpanel) popped up a warning in the upper right corner. That’s annoying, because this area in HABpanel shows the outside temperature.

Before investigating what’s going on, I had to figure out a way to get a screenshot of the display - without running into the kitchen with my mobile phone. And without attaching a keyboard all the time (to press the Print button).


Hide the mouse cursor on a Raspberry Pi

The openHAB HABpanel we have in the kitchen runs on a Raspberry Pi and uses a touchscreen display. The browser starts in fullscreen mode, and shows a specific HABpanel screen for this display. That’s all nice, but by default the mouse cursor is in the way. Let’s get rid of it.

The Raspbian system which runs on the Pi comes with a package called unclutter. This hides the curser after a few seconds. All I have to do is install the package, and start the app. Right?


Reboot the Raspberry Pi on network failures (brcmfmac: brcmf_cfg80211_scan: scan error -110)

In one of my earlier blog posts I reported that occasionally the HABpanel will disconnect from the server. Turns out it’s not HABpanel, but it’s the Pi itself which is causing the trouble. Part of the problem why it took me so long to investigate is that the display is in the kitchen, and someone had to have a look and spot the small red error message. To work around that problem, I hooked the device up in the network monitoring, and had an alarm triggered when the device is not reachable. Sure enough, that happens occasionally.

Because I moved /var/log to a small RAM disk to avoid wearing out the SDcard, all logs are lost once the device is rebooted. Had to bring keyboard and mouse to the kitchen in order to save the logfiles once the device was no longer reachable over the network.

Turns out it’s a well-known problem with the network chip on the Raspberry Pi. One of the GitHub issues is open since 2018, the other one since 2019. So no hope for a real quick fix :-(