ads' corner

Dim the Raspberry Pi screen

The new Raspberry display works nice, but the screen is too bright. At night in the kitchen it enlightens the entire room - unnecessarily. Since I’m using the original Raspberry Pi 7" touch display, the brightness can be controlled in /sys/class/backlight/rpi_backlight/brightness. This “file” can hold a value from 0 (display off) to 255 (full bright).

My first idea was to use a light sensor. But the display itself does not have such a sensor, and if I connect one to the Pi, I somehow need to connect the sensor in a way that it can “see” the light in the room. Which means the sensor is clearly visible next to the display.

The next idea is a cron job, which dims the display, depending on the time of the day. A bit brighter over the day, and almost dark in the night. Cron job works fine, but let’s make this an exercise in writing more code by using systemd timers. Because why not making it more complicated …


Ansible: TRANSFORM_INVALID_GROUP_CHARS deprecation warning

After upgrading Ansible to version 2.8.3, the following deprecation warning appeared many times:


Ansible: "apt" module and loops

After upgrading Ansible to version 2.8.3, the “apt” module started spitting out deprecation warnings:


Occasional HABpanel disconnect from the openHAB server

The new display showing HABpanel works quite nice. But occasionally the fullscreen browser will lose the network connection. As far as I can see, it’s not a Wi-Fi problem of the Raspberry Pi, but still annoying: in the morning the browser shows a small red warning that the connection to the openHAB server is lost, time is still correct, but temperature and the status of other devices is outdated. To fix that, I have to leave fullscreen mode, hit reload - and then there is no keyboard for going into fullscreen mode again (that’s using the F11 key).


Automatically start a fullscreen browser on a Raspberry Pi - show openHAB HABpanel

The Raspberry Pi with the touch display for the home automation system is coming along nicely. One problem to solve: how to display the openHAB HABpanel, and which browser to use?

Firefox and Chrome don’t run on Raspbian. However Chromium (the open source part of the Chrome browser) is. That’s a good start. But how to start the browser automatically, and in full screen?


Raspberry Pi: disable Wi-Fi powersave, and stay connected all the time

Recently I installed a Raspberry Pi with Raspbian, and attached a touchscreen to it. The device is supposed to work as a display for our openHAB home automation system. All nice and shiny, except the Pi occasionally disconnects from the Wi-Fi - apparently in order to safe power. Once the network device is needed, the Wi-Fi is reconnected. That is the default setting.

That is quite annoying, because the HABpanel will lose it’s connection to the openHAB server, and no longer show widget updates. Some widgets like “time” will just continue to work, but other widgets like status of the washing machine, or the current outside temperature just show the last state, and never update.


openHAB: widget with multiple different background colors

Previously I blogged about how the washing machine and the dryer are integrated into the openHAB home automation system.

For a while I had a standard Dummy widget in HABpanel, but that didn’t look very nice, was very standard, and the different icons for different states don’t really work. When I started integrating another Raspberry Pi with a touch screen (blog post to come), I refreshed the HABpanel, added another dashboard, and along the way I wrote a new “Template” widget for the washing machine and the dryer.


Ansible: Just mount an existing filesystem

There is no easy way to “just mount” an existing filesystem in Ansible, using the mount module. I just want to mount an already defined mount point, and don’t really care about all the configuration here.


Ansible: copy a directory recursive - take two

Another slow attempt at copying directories and files on a remote system from one place to another, using just Ansible operations.


Certificate expiration date in Ansible

In one of my Ansible Playbooks I’m updating Let’s Encrypt certificates. Because the Playbook is rather long, I want to make sure that Ansible is not spending cycles on a certificate which is not about to expire. Hence I wrote a small filter plugin, which receives the certificate path and the number of days the certificate must be still valid.

This plugin is used to filter out any “good” certificate which does not need to be updated.