ads' corner

badblocks: Value too large for defined data type invalid end block (4394573824): must be 32-bit value

Bought a new large external disk as data sink for my server at home. The disk is 18TB and after the previous purchase had a hardware problem I wanted to make sure that this one is working. Created a partition, formatted it with ext4 and let's run a badblocks check on it. That failed, badblocks can't handle Big Data.

Replace and re-add a failed drive to a Linux software RAID

Most of my systems run on a software RAID 1 configuration (that is, two disks, where each disk is mirrored to the other). This way, one of the disks can fail and still all the data is available.

If a disk failure happens, the disk is replaced with a similar disk, and then needs to be configured and re-added to the RAID.