ads' corner

Monitor ChromeCast status in openHAB

I really like to monitor things, to catch issues early on. In our home we have a couple ChromeCasts, both Audio and Video. They are all connected to the openHAB system, Once in a while they stop working, and need to be restarted (unplugged and plugged in again). Unfortunately you usually only find that out when you want to stream something, and wonder why either the ChromeCast does not show up in the device list, or does show up but does not accept the media.


raspi-config automated

While I installed the Raspberry Pi with the Raspbee board on it, I had to modify the settings for the serial device. That’s done using the raspi-config tool on Raspbian.

However since I’m into automation, I don’t want to start raspi-config manually, but had to figure out how to do that in an automated way.


New OpenWeatherMap channels missing after openHAB upgrade from 2.4 to 2.5

A while ago I upgraded openHAB from version 2.4 to 2.5. That comes with the usual share of problems, but eventually I got it working.


Install a Raspbee II on a Raspberry Pi

A while ago I got a recommendation to look into a Raspbee (from dresden elektronik) as Zigbee gateway. That looked like fun, therefore I ordered one of the devices. The first step is the installation of the Pi itself and then the software for the Raspbee.


Raspberry Pi watchdog for openHAB

The openHAB display in the kitchen is still the problem child. Occasionally it just stops, other times it does not refresh the HABpanel, even though it has a connection to the openHAB server. Then there is the problem with the network card in the Pi. And - ok, that’s a server-side problem - occasionally the weather stops updating. All in all that’s a lot of trouble for a display which is just supposed to run standalone.

In the latest iteration I looked into activating the integrated hardware watchdog in the Raspberry Pi. Checking the temperature it never goes above ~55°C celcius, even though the display is in an almost closed frame and can’t exchange much heat with the environment. But nevertheless occasionally the Pi just halts, and stops operating.


Ansible, delegate_to and set_fact

Another Ansible upgrade, another Playbook failing.

I have a number Playbooks which run on virtual machines. Some tasks are “outsourced” to the physical machine where the VM is running on, using delegate_to. One of the tasks (which I haven’t used in a while, because I rarely touch this machine) stopped working, and instead throws a variable undefined error. But from the beginning, here is the VM Playbook:


Local cachíng of Ansible Facts

Every time Ansible runs a Playbook, the first step (by default) is gathering facts about the target system:


Disable screensaver for Raspberry Pi

The 7" Raspberry display in the kitchen is nice, but unfortunately by default the installation comes with a screensaver enabled. After a while, the display goes dark. No one wants to stare at a blank display, and touch the screen in order to see crucial information.


Remove Trashcan Icon from Raspberry Pi Desktop

Our home automation got a nice 7" Raspberry display in the kitchen, showing the most relevant information (like temperature, weather, washing machine, dryer ect) on a dedicated screen. Quite handy, especially the temperature, and the one-click stop to the weather forecast.

While installing the Pi and setting everything up, I stumbled over the Icons which LXDE by default shows on the desktop. Not necessary, I want them removed. All I want on the desktop is the browser icon which directly goes to the HABpanel.

The reason is simple: if the Pi starts up, but the browser for unknown reasons doesn’t come up, I don’t want anyone to be confused by additional icons on the desktop. After all, usually the LXDE desktop is not seen by default.


Ansible: Use errors="ignore" instead of skip

Another Ansible upgrade deprecation warning, which appears in Ansible 2.8: